電壓340--350，電流65--68，加熱作用太慢。有什么好辦法提高電壓嗎(ma)？

1、160KW的變壓器用了12的電流，那么也就是只用了近1半的負載罷了，這個情況電壓由410V～415V降到340V～350V這是不正常的，從數據上看您這邊的供電網還是非常不錯的，這里要是線路太長，線損太大引起。

2、可以用電容補償嗎?工業上高壓電容補償，這要是針對變壓器功率因數太低（補償前只有0.8左右），如果您的變壓器之前沒有做無功補償，那么這還是有作用的，并且也定要補償，不然電力公司檢測出來會被罰款的，但如1剖析，您這邊要不是功率因數低造成，所以對于電壓的上升作用不大。

3、50kw電磁加熱器電流卻只有6～68A，依照這個參數核算這臺控制器連50KW都達不到，或許您被騙了，隨著電磁加熱器行業的競爭劇烈，有非常多不法的商家經常用小功率產品假充大功率產品再以相對較低的價格進行販賣，如用40KW超載運用假充50KW甚至60KW再以比正常50KW或許60KW的價了解到的數據。

電磁加熱器應用范圍：

1、塑料橡膠行業，如：塑料用吹膜機、拉絲機、注塑機，造粒機，橡膠用擠出機、硫化機、電纜生產擠出機等。

2、醫藥化工行業，如：醫藥專用輸液袋、塑料器材生產線，化工行業液體加熱輸送管道等等。

3、能源、食品行業，如：原油輸送管道的加熱；食品機械，如：超貨機等需要電加熱的設備。

4、大功率商用電磁灶機芯。

5、建材行業，如：燃氣管生產線、塑料管材生產線、PE塑料硬質平網、土工網機組、自動中空成型機、PE蜂窩板生產線、單雙壁波紋管擠出生產線、復合氣墊膜機組、PVC硬管、芯層發泡管生產線、PP擠出透明片材生產線、擠出聚苯乙烯發泡管材、PE纏繞膜機組。

6、印刷設備里的干燥加熱。

7、其它類似行業加熱。

電磁感應加熱器線圈發熱的問題：

1、如果將金屬物體置于磁場中，或把它在磁場中切割磁力線時，其內部會產生感應電流。這種感應電流會使金屬塊會很快的發熱。電磁感應加熱器的線圈發熱要看溫度達到多少度，在般的情況下，電磁線圈的正常溫度在70度左右，80度以下才是正常的，如果超過了90度，肯定就是有問題了。

2、電磁感應加熱器線圈本身的問題：線圈的問題就涉及的質量和選配上了。（質量上的問題就不講解了），如果是使用高頻線，那線般問題不大。這種情況其實還是主板的問題，我們的以前的主板也會有這個問題，因為主板缺陷，而25平方的線也比較粗了，集膚效應導致線材發熱也是必然的，以前我們都是用多股漆包高頻線來解決密封電氣箱內，每個器件的發熱量的，其實使用上沒什么區別，就是安裝變得繁瑣了些，不過現在公司的電蔗感應加熱器已經改善，調整了機器的Q值，并對整個機芯做了隔熱、散熱處理，斷不會出現單根25平方線高溫現象，所以如果大家買了機器發熱量過大，又不好退換的話，可以考慮下用多股線來代替單的25平方線，當然好還是找有實力的公司購買，畢竟多少是因為設計問題而導致的發熱現象。

電磁加熱器的耗電情況是怎樣的？工作原理是把220V或者380V交流電，整流后轉換成直流電，再將直流電進行濾波，利用IGBT或者可控硅再將直流變成交流，在感應線圈內產生高頻磁力線，是感應線圈內導體工件表面產生渦流依靠自生內阻發熱。電磁加熱器工作中當溫度沒達到設置的溫度時，電磁加熱器就會直加熱，當達到了預設的溫度以后電磁加熱器就停止加熱了，也就不再耗電了。電磁加熱器每個小時的耗電量多少與電磁加熱器加熱的時間長短有關。電磁加熱器剛工作是滿功率，加熱溫度了，就是工作會，停會。總體上來說，電磁加熱器耗電量是很小的，因為電磁加熱器不是直加熱工作的，而是有間隙的加熱的，先是加熱，然后達到溫度后就停止加熱，之后就開始保溫工作，直到溫度沒達到預設的溫度后再加熱下，整體上來講，電磁加熱器并不是直加熱耗電的，所以也是比較省電的個原因。同時因為料筒上還包有層保溫棉，能起到保溫和隔熱的效果，那么熱量就不會損失掉了，那么能夠持續恒溫加熱的時間就越長了。耗電量也就越小了。通過上述對電磁感應加熱器改造時所配功率的介紹，我們可以了解電磁加熱器加熱的時間越短那么耗電量就越小，反之電磁加熱器加熱的時間越長，耗電量就越大。

普通加熱圈加熱方式:接觸式熱傳遞加熱：

1、耗電的 30-70% 轉化為工作熱能。

2、加熱通過接觸方式傳遞熱能。

3、加熱及冷卻都有慣性現象產生，及升溫降溫都緩慢。

4、加熱有死角，不能完全包裹在料筒外層。

5、加熱圈損耗大，壽命短。

 電磁式加熱方式與電阻絲加熱方式對比：

1、節能效果好：相比原電阻絲加熱圈節電效果都在30%以上，相對不同的原料、生產不同的產品，節電效果有所變化。但在已使用的產品中節電效率大可達75%。

2、環保效果好：可顯著降低環境溫度。

3、使用壽命長：加熱圈連續運行溫度只有100℃左右，不存在加熱圈更換問題。相對于電阻絲加熱減少了二次投入。

4、可提高產品產量：由于該產品的發熱效率高，能顯著減少升溫時間，提高產品產量。

5、性能安全可靠：品質優良、高度自動化、無須人工調節。

電磁加熱能省電的原因及效果：電磁加熱器的原理是電磁感應加熱的原理，它采用內部加熱的方法，即讓材料自身發熱，而不是傳遞熱量，它是通過電、磁和熱之間的能量轉換來達到加熱材料的目的。此外，還有包裝20Mm厚的保溫棉外容器的材料。可以說，電磁感應加熱過程中存在的熱量損失很低，熱能利用率高達98%。相反，電磁感應加熱的節電效果是相當可觀的，用電磁輻射熱利用率的高值和低值減去電阻加熱的小值和大值，就可以從電磁加熱中獲得種節約電量。

電磁加熱技術原理：

1、電磁加熱器：電磁加熱器是種利用電磁感應原理將電能轉化成熱能的裝置，電磁加熱控制器將220V，50/60HZ的交流電整流變成直流電，再將直流電轉成頻率為20-40KHZ的高頻高壓電，或者是380v 50/60HZ的三相交流電轉換成直流電再將直流電轉換成10~30KHZ的高頻低壓大電流電，用來工業產品加熱。

2、電磁加熱圈：高速變化的高頻高壓電流流過線圈會產生高速變化的交變磁場，當用含鐵質容器放置上面時，容器表面即具切割交變磁力線而在容器底部金屬部分產生交變的電流（即渦流），渦流使容器底部的載流子高速無規則運動，載流子互相碰撞、摩擦而產生熱能。從而起到加熱物品的效果。即是通過把電能轉化為磁能，使被加熱鋼體表面產生感應渦流種加熱方式。這種方式從根本上解決了電熱片、電熱圈等電阻式的，通過熱傳導方式加熱產生的熱效率低下的問題。